The Vortex Titan Series TSG Gate is designed to meet the most demanding applications when handling heavy-duty abrasive materials such as sand, gravel, coal, and whole grains. The TSG Gate handles dry material in gravity flow applications where positive material shut-off and dust tight sealing is required. This slide gate is available in a wide variety of configurations with rectangular sizes and customer specific hole patterns.
Key Industries Served: Agriculture, Chemicals, Minerals, Mining, Petrochemicals, Plastics, Textiles
Rated for ATEX Zone 0/20 internal and Zone 1/21 external
- Gravity flow
- Handles Aggregates, Coal, Minerals, Powder, Pellets, Granulars
- Dust tight design
- Open / closed or volume metering of material
- Standard sizes: 6″ – 30″ | 50mm – 400mm | Contact us for custom sizes
Optional bonnet purge for clearing fine materials.
Replaceable abrasion resistant liners.
Abrasion resistant blade.
Live-loaded polymer side seals.
Displacement end pocket prevents material packing.
Painted carbon steel frame inhibits rusting.
Externally-greased steel support rollers.
Replaceable bonnet seals.
|Size/Bore Options||6” to 30” and Larger in Square or Rectangular sizes with Round Transition Options|
|Media||Aggregates, Coal, Minerals, Powder, Pellets, Granulars|
|Connection Options||SVC Flange and/or Custom Flanges|
|Media Temperature||250°F (121°C) continuous to 300°F (149°C) intermittent service, Modifications allow up to 400°F (204°C) continuous to 450°F (232°C)|
|Media Pressure/Vacuum||0 psig, Gravity Flow Only|
|Valve Construction Options||Carbon Steel|
|Material Contact Options||304 Stainless Steel|
|Drive/Acuation||Double Acting Air Cylinder and Solenoid Operated Air Control Valve, Electric Actuator, Hydraulic Actuator, Hand Crank, or Chain Wheel|
|Position Confirmation||Magnetic Reed, Proximity, or Mechanical Limit Switches|
|Compliance Approvals||CE, ATEX|
|Industry Use||Agriculture, Chemicals, Minerals, Mining, Petrochemicals, Plastics, Textiles|
|*more modifications available based on application|
Product contact areas are made of 304 stainless steel. Rollers are 304 stainless steel and roller stud bolts are 304 or 18-8 stainless.
Modifications are made allowing 400 F (204 C) continuous to 450 F (232 C) intermittent service.
Bonnet is manufactured with solid, gasketed covers. (Allows the valve to accept air purge.)
Clear power covers are provided for the observation of gate blade position.
Standard end seal and end deflector are removed and replaced with a larger end seal, displacement pocket filled and a lower end seal retainer added.
Click here to view Dimensional Information