The Vortex Seal Tite Diverter is designed for use in gravity flow applications where material can be diverted from one source to either two or three destinations. The Seal Tite Diverter offers a removable access door for interior inspection, cleaning and maintenance.
Key Industries Served: Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles
Rated for ATEX Zone 0/20 internal and Zone 1/21 external
- Leading edge of blade protected from material flow
- Wear compensating shaft seal prevents leakage
- Removable access doors for internal inspection, cleaning and maintenance
- Positive seal of dust and fine powders
- Available in 2 and 3-way configurations
- Internal access without tools
- Food friendly options available
- Gravity flow
- Handles nonabrasive to abrasive powders, granular or pellets
- Carbon or stainless steel material of construction
- Material construction options available
- Standard sizes: 4″ – 30″ | 100mm – 750mm | Contact us for custom sizes
2 – WAY:
2 – WAY Straight:
3 – WAY:
The recessed blade protects the leading edge of seal from material flow and eliminates excess wear.
a removable blade allows for seal replacement without extracting the valve from service.
The shaft seal replaces the open area where migration of material to the off leg normally occurs.
On many standard flapper style diverters, material flow creates abrasion to the leading edge of the flapper vane that can lead to leakage and cross-contamination of material. The Seal Tite Gravity Diverter is engineered to channel the flow of material away from the leading edge of the flapper vane.
An optional Clean-In-Place access panel with spin knobs allows for quicker access to the interior of the diverter for inspection, cleaning or sanitation purposes.
Traditional flapper diverters have extremely weak or no shaft seals causing leakage and cross-contamination. The Seal Tite Gravity Diverter features a live-loaded, wear compensating, polymer shaft seal minimizing product leakage past the vane shaft.
|Size/Bore Options||4” to 30″ Diameter Square or Rectangular with Round Transition Options|
|Media||Powder, Pellets, Granulars|
|Connection Options||SVC Standard Flange, ANSI, DIN, JIS, or Custom Flanges|
|Media Temperature||Up to 180°F (82°C) continuous to 250°F (121°C) intermittent service, modifications allow up to 400°F (204°C) continuous to 450°F (232°C) intermittent service|
|Media Pressure/Vacuum||0 barg, Gravity Flow Only|
|Valve Construction Options||304 or 316L Stainless Steel, and Carbon Steel|
|Material Contact Options||304 or 316L Stainless Steel, and Carbon Steel|
|Seal/Seat Material||Nylon, PET, UHMW, Glass Filled Teflon, Natural Rubber, Kryptane, and/or Silicone Rubber|
|Drive/Actuation||Double Acting Air Cylinder with Solenoid Operated Air Control Valve, Electric Actuator, or Hand Lever|
|Position Confirmation||Magnetic Reed, Proximity, or Mechanical Limit Switches|
|Compliance Approvals||CE, ATEX, FDA|
|Industry Use||Agriculture, Chemicals, Foods, Minerals, Petrochemicals, Plastics, Textiles|
|*more modifications available based on application|
Material contact is 316L stainless steel.
Modifications are made allowing 250 F (121 C) continuous to 300 F (149 C) intermittent service.
Modifications are made allowing 400 F (204 C) continuous to 450 F (232 C) intermittent service.
A special access panel and fasteners that allow for quicker access to the interior of the valve for inspection, cleaning or sanitation.
Round transitions with SVC bolt hole pattern are mounted to the inlet and two outlets of the valve.
Round transitions with ANSI bolt hole pattern are mounted to the inlet and two outlets of the valve.
The angle the outlets are offset (45 or 30) degrees .
Kryptane blade seal for more abrasive materials.
Click here to view Dimensional Information